Reviews Scanned
1
Stratux Basic Kit - Large Antennas
- PARTS INCLUDED: ADS-B kit with GPS, AHRS, SDR, UAT, high gain antennas, case, fan, SD card with Stratux software.
- JUST ADD PI: Raspberry Pi board NOT included. Will work with Raspberry Pi 3B or 3B+.
2
Stratux 1090ES & UAT - Radios (Low Power UAT) and High Gain Antennas
- Plug and play with and supported by Stratux project.
- Includes two low power radios each programmed for tuned antennas.
- High gain antennas. Improved sensitivity radios.
- 70%+ lower power consumption and optimized heat dissipation.
- For Stratux ABS injection molded case ONLY. Will NOT fit into SummitLink cases.
4
Stratux Case with Fan, White ABS
- Includes case, 3 CFM brushless fan, and screws and assembly tools.
- For use with Raspberry Pi 2 and 3.
- Sized for use with "Nano" sized SDRs and a Vk-172/GPYes or Vk-162 GPS.
- Fits Stratux AHRS board.
- Injection molded white ABS with flame retardant.
6
Stratux ADS-B Dual Band Receiver Aviation Weather and Traffic - Internal WAAS GPS, AHRS, Battery Pack, Suction Mount, Antennas, SDR
- ASSEMBLED ADS-B KIT: Stratux dual band ADS-B receiver kit includes AHRS, fan controller, 10000mAh battery pack, suction mount, strap, SD card adapter, power cable, supports ForeFlight Synthetic Vision and other popular EFBs. It has a 30 day return policy and technical support backed by Crew Dog Electronics.
- RELIABLE INFORMATION: High-gain dmurray14 antennas are optimized for 978 MHz and 1090 MHz frequencies allowing you to receive and display air-to-air traffic, data, and FIS-B weather including animated regional and CONUS NEXRAD, METARs, TAFs, AIR/SIGMETs, PIREPs, winds and temps aloft, TFRs, NOTAMs, and SUA information.
- PORTABLE: Stratux is a highly portable receiver including a suction mount for window mounting. Provides ADS-B traffic and weather information and navigation GPS position using internal GPYes WAAS GPS receiver, supports multiple iPads, iPhones, or Android tablets connected via WiFi. Perfect for WiFi only iPads and tablets.
- LATEST FIRMWARE: Latest Stratux software (v1.6r1) is already loaded on MicroSD card. Just plug in included rechargeable battery pack for 4+ hours of flying time.
- COMPATIBILITY: Stratus 2S functionality at Scout prices. Built using Raspberry Pi 3 board and parts direct from Stratux project founder. Supports ForeFlight, FlyQ EFB, Navigator, AvNav, WingX, Avare EFB, FltPlan Go, DroidEFB, AerovieReports, Avplan EFB, iFly GPS, DroidEFB, OzRunways EFB, Garmin Pilot.
7
Nooelec Dual-Band NESDR Nano 2 ADS-B (978MHz UAT & 1090MHz 1090ES) Bundle for Stratux™, Avare, Foreflight, FlightAware & Other ADS-B Software Applications. Includes 2 SDRs, 4 Antennas & 5 Adapters
- Includes 2pc NESDR Nano 2 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup.
- The small size of the NESDR Nano series of SDRs ensures your embedded application has a footprint as small as possible.
- Each SDR includes a calibration sticker and adhesive identification labels.
- 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded applications.
- Full 1-year warranty through Nooelec on all bundle components.
8
RUSFOL Powerful Suction Cup Mount,GPS Mount for STRATUX CASE
- Made of durable ABS material, snug fit the case and includes a stainless shim, can strengthen the steadiness!
- Design for Stratux "white ABS" case. Does NOT fit SUMMITLINK cases.
- Once you attach the mount to the window, you can install and remove your case easily.
- Use high-quality suction cup mount, can attach firmly to the aircraft windshield, windows, canopy or side window of the aircraft.
- Slim framework keeps the case close to the window (w/ GPS chip outboard) and faces the antenna outward, ensure GPS signal is strong.
9
Stratux Case Suction Mount
- Designed to face GPS antenna outwards.
- Four included suction cups make for easy mounting on curved windows.
- Fits the Stratux "white ABS" case. Does NOT fit SUMMITLINK cases.
- Does NOT fit SUMMITLINK cases.
- Does NOT fit SUMMITLINK cases.
10
Stratux 8GB Micro SD Card Pre-Programmed v1.6r1
- 8GB SD CARD: 8 GB SD card gives you extra space for Stratux image and logs
- LATEST FIRMWARE: Pre-programmed with the latest stable Stratux version v1.6r1
- AHRS 2.0 SUPPORT: works with AHRS 1.0 and 2.0
- BONUS: SD adapter and protective case included
Our Promise to You
We receive a lot of questions about what products we recommend, especially the products on this page. Questions like:
- What is the best Stratux for 2022??
- What is the best Stratux?to buy?
- What is the best Stratux to buy on the market?
- or even What is the most affordable (most budget friendly, cheapest or even most expensive!!!) Stratux??
All of these above questions make purchase decisions difficult. We know the feeling because we used to be in this weird situation when searching for these items.
Before deciding to buy anything, make sure you research and read the reviews from trusted sources.?Luckily, we use incredibly smart and complicated AI to help find great products. We use our own custom algorithms to generate lists of the best brands and give them our own approval rating to rank from 1st to 10th.
You can see the Stratux of above. This list is updated regularly, so you can be sure that the information provided is up-to-date.
You may?read more about us?to learn how we support this site. Don?t hesitate to?contact us if something is incorrect or provides misleading information.