Reviews Scanned
- 🤗𝐀𝐮𝐭𝐨 𝐁𝐞𝐝 𝐋𝐞𝐯𝐞𝐥𝐢𝐧𝐠 𝐒𝐞𝐧𝐬𝐨𝐫 𝐊𝐢𝐭 - Creality Ender 5 Plus 3D printer has auto bed leveling sensor which can precisely measure the tilt of hotbed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- 🤗𝐄𝐪𝐮𝐢𝐩𝐩𝐞𝐝 𝐰𝐢𝐭𝐡 𝐓𝐰𝐨 𝐋𝐞𝐚𝐝 𝐒𝐜𝐫𝐞𝐰𝐬 𝐨𝐧 𝐙 𝐀𝐱𝐢𝐬 - The hot bed of Creality Ender 5 Plus 3D printer was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
- 🤗𝐃𝐮𝐚𝐥 𝐘 𝐀𝐱𝐢𝐬 𝐌𝐨𝐭𝐨𝐫𝐬 - Creality Ender 5 Plus 3D printer supports dual axis motors. Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
- 🤗𝐄𝐚𝐬𝐲 𝐭𝐨 𝐀𝐬𝐬𝐞𝐦𝐛𝐥𝐞 𝐚𝐧𝐝 𝐎𝐩𝐞𝐫𝐚𝐭𝐞 - Creality Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
- 🤗𝐄𝐱𝐭𝐫𝐚 𝐆𝐥𝐚𝐬𝐬 𝐏𝐥𝐚𝐭𝐞 - Creality Ender 5 Plus 3D printer adds a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.
- Drop in Direct Drive Extruder Ender 5 Series. It is Fully Compatible with Creality Ender 5 / Ender 5 Pro / Ender 5 Plus 3D Printers.
- High Torque: 3:1 Gear ratio
- This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.
- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- It is made in the USA by Micro Swiss in-house.
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance.
- Compatible with PLA、PETG、PEEK、ABS and any other filaments.
- No more tape, no more glue, no more shovel, and release your printing anxiety.
- Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- This PEI printing plate is compatible with Ender 5 Plus 3D Printer.
- Gold PEI with frosted surface: PEI material has excellent high temperature stability, flame retradant, heat resistance, high strength, abrasion resistance and printing stability.
- Two in One Kit: PEI Printing Plate consists of two parts, soft magnetic adhesive plate and gold frosted PEI spring steel plate. The soft magnetic plate has a strong magnetic force to ensure that the PEI spring steel plate will not move during the printing process. At the same time, the PEI spring steel plate has excellent bending resistance, and the model can be removed by bending after the printing is completed.
- Heat resistant and no demagnetization: PC belongs to the soft magnet, with flame retardant, wear resistance, oxidation resistance, low forming shrinkage and heat resistant without demagnetization.
- Frosted PEI coating: The frosted PEI coating can provide good adhesion during printing and avoid warping of the first layer. When the temperature drops after printing, the model can be well separated from the PEI coating, just bending to remove it , and you can say goodbye to the complicated process of taking the model.
- Compatible Model: This PEI printing plate is compatible with Ender 5 Plus, the product size is 377*370*2mm, the surface has PEI coating, please do not scratch the surface with sharp objects to avoid damaging the frosted PEI coating.
- Fits: Ender 5 / Ender 5 Pro / Ender 5 Plus
- 3:1 Gear ratio
- Adaptable to wide range of 3D Printers
- Seamless integration with Revo Hotend (24V)
- Made in USA by Micro Swiss
- Compatible with Creality ender 5 plus 3d printer. Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)
- ender 5 plus hot end, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- This creality ender 5 hot end replaced the original perfectly, the hot end was easy to get operational with minimum soldering.
- Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- Superior performance: With high quality teflon tube, reduce clogging, smooth filament feeding, rapid heating, precise temperature contral.
- It's 100% Creality Original.
- Suitable for Creality Ender 5 3d printer.
- Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
- MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
【Special Design】: Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: The cost of the product is very expensive. In fact, it is not easy to produce and transport, and the quantity is small. Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
【Proven Solution】:No glue, No tap, when hotbed temperature reaches 60℃ ,materials such as PLA ABS will stick well, and after printing, when spring steel ender 5 plus PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
【Good Quality】: Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130°C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.
【Practical Features】:Size:377x370mm/14.84x14.56inch is suitable for Ender 5 Plus and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
【Quality Promise】: All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- PEI PRO - Bed Adhesion Fixed: Start a print with confidence, leaving the build plate unattended without worrying about the common failures caused by poor bed adhesion. By eliminating 99% of these printing failures, Fula-Flex 3.0 ensures a reliable and stress-free printing experience for users.
- Adhesion Across Materials: Fula-Flex 3.0 features strong adhesion for all common 3D Printing materials including PLA, ABS, PETG, TPU, Nylon, & PC.
- Quick and Easy Print Removal - Hassle-Free Experience: When your print is complete, just flex. No scrapers, no damaged parts, no sticking your plate in the freezer. Just flex and enjoy your print.
- Fulament is a Florida & NYC based company, and have sold over 100,000 flex plates. All our products are backed by a 1 year warranty. Have trust that a) the product will work well and b) that we’ll be there for you if something goes wrong.
- Fula-Flex comes in over 80 sizes, ensuring compatibility with almost every printer on the market!
- 【Wide Compatibility】Newest sprite extruder compatible with most 3D printers such as Creality Ender 3/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR 10. More compatible performance supports you to adapt to more 3D printer models, making it more convenient for your modifications. Suitable for both professional and personal use. Come with 5PCS d0.4mm MK Nozzles.
- 【Durable & Stable 】Dual gear drive does not damage the filament, supports stable, smooth and precise filament feeding. The premium full-metal body design is compact, exquisite and efficient heat dissipation. It's only weighs 210g, but the structure is durable, the function is powerful and complete.
- 【Smooth Feeding & High Torque】3.5:1 reduction ratio improves the extrusion performance of fliaments, supports more smooth printing. The adjustable tension allows you to fine-tune the pressure exerted by the drive gears onto the filament according to your preferences which helps to print more exquisite models.
- 【100% Creality Original New Product】 Upgrade your 3D printing experience with Creality's 100% original sprite extruder.With its unique design, this extruder provides unparalleled precision and control, making it ideal for creating intricate and complex designs. Please Note: the Hotend is not included, but the extruder is compatible with original hotends for even more DIY possibilities. Other modified hotend may have slight deviations, but they will not affect the usage.
- 【Easy To Install & 180- Day Warranty】Fix it on the mounting bracket, Plug and play, simple installation, suitable for more compatible nozzles without changing your nozzle structure. Simpler to install compared to other extruders. The packaging contains the necessary parts for installation. If you encounter any problems during the using the extruder, please contact us, we have a 180 day warranty
Our Promise to You
We receive a lot of questions about what products we recommend, especially the products on this page. Questions like:
- What is the best Ender 5 Plus for 2022??
- What is the best Ender 5 Plus?to buy?
- What is the best Ender 5 Plus to buy on the market?
- or even What is the most affordable (most budget friendly, cheapest or even most expensive!!!) Ender 5 Plus??
All of these above questions make purchase decisions difficult. We know the feeling because we used to be in this weird situation when searching for these items.
Before deciding to buy anything, make sure you research and read the reviews from trusted sources.?Luckily, we use incredibly smart and complicated AI to help find great products. We use our own custom algorithms to generate lists of the best brands and give them our own approval rating to rank from 1st to 10th.
You can see the Ender 5 Plus of above. This list is updated regularly, so you can be sure that the information provided is up-to-date.
You may?read more about us?to learn how we support this site. Don?t hesitate to?contact us if something is incorrect or provides misleading information.